Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns image password
82
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
cns image password
To configure a password to use with the Cisco Networking Services (CNS) image agent services, use the
cns image password command in global configuration mode. To disable the use of a password, use the
no form of this command.
cns image password image-password
no cns image password image-password
Syntax Description
Command Default No password is used with the CNS image agent services.
Command Modes Global configuration (config)
Command History
Usage Guidelines Use this command to create a password that is sent with the image ID in all CNS image agent messages.
The recipient of these messages can use this information to authenticate the sending device. This
password may be different from the username and password used for HTTP basic authentication
configured with other CNS image agent commands.
Examples The following example shows how to configure a password to be used for the CNS image agent services:
Router(config)# cns image password textabc
Related Commands
image-password Password to be used for CNS image agent services.
Release Modification
12.3(1) This command was introduced.
12.2(31)SB2 This command was integrated into Cisco IOS Release 12.2(31)SB2.
12.2(33)SRB This command was integrated into Cisco IOS Release 12.2(33)SRB.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.
12.2(33)SXI This command was integrated into Cisco IOS Release 12.2(33)SXI.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
cns id Sets the unique event ID, config ID, or image ID used by CNS
services.
To Next Page
Loading...
Need help?
General
