Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
police (percent)
296
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
police (percent)
To configure traffic policing on the basis of a percentage of bandwidth available on an interface, use the
police command in policy-map class configuration mode. To remove traffic policing from the
configuration, use the no form of this command.
police cir percent percentage [burst-in-msec] [bc conform-burst-in-msec ms]
[be peak-burst-in-msec ms] [pir percent percentage] [conform-action action [exceed-action
action [violate-action action]]]
no police cir percent percentage [burst-in-msec] [bc conform-burst-in-msec ms]
[be peak-burst-in-msec ms] [pir percent percentage] [conform-action action [exceed-action
action [violate-action action]]]
Syntax Description cir Committed information rate. Indicates that the CIR will be used for policing
traffic.
percent Specifies that a percentage of bandwidth will be used for calculating the
CIR.
percentage Specifies the bandwidth percentage. Valid range is a number from 1 to 100.
burst-in-msec (Optional) Burst in milliseconds. Valid range is a number from 1 to 2000.
bc (Optional) Conform burst (bc) size used by the first token bucket for policing
traffic.
conform-burst-in-msec (Optional) Specifies the bc value in milliseconds. Valid range is a number
from 1 to 2000.
ms (Optional) Indicates that the burst value is specified in milliseconds.
be (Optional) Peak burst (be) size used by the second token bucket for policing
traffic.
peak-burst-in-msec (Optional) Specifies the be size in milliseconds. Valid range is a number
from 1 to 2000.
pir
(Optional) Peak information rate. Indicates that the PIR will be used for
policing traffic.
percent (Optional) Specifies that a percentage of bandwidth will be used for
calculating the PIR.
conform-action (Optional) Action to take on packets whose rate is less than the conform
burst. You must specify a value for peak-burst-in-msec before you specify
the conform-action.
exceed-action (Optional) Action to take on packets whose rate is within the conform and
conform plus exceed burst.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English