Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show xconnect
610
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show xconnect
To display information about xconnect attachment circuits and pseudowires (PWs), use the show
xconnect all command in privileged EXEC mode.
show xconnect {all | interface interface | peer ip-address {all | vcid vcid}} [detail]
Syntax Description
Command Modes Privileged EXEC
Command History
all Displays information about all xconnect attachment circuits and PWs.
interface
interface
Displays information about xconnect attachment circuits and PWs on the specified
interface. Valid values for the argument are as follows:
• atm number—Displays xconnect information for a specific ATM interface or
subinterface.
• atm number vp vpi-value—Displays virtual path (VP) xconnect information
for a specific ATM virtual path identifier (VPI). This command does not
display information about virtual connect (VC) xconnects using the specified
VPI.
• atm number vp vpi-value/vci-value—Displays VC xconnect information for a
specific ATM VPI and virtual circuit identifier (VCI) combination.
• serial number—Displays xconnect information for a specific serial interface.
• serial number dlci-number—Displays xconnect information for a specific
Frame Relay data-link connection identifier (DLCI).
• vlan vlan-number—Displays vlan-mode xconnect information for a specific
VLAN interface.
peer ip-address
{all | vcid vcid}
Displays information about xconnect attachment circuits and PWs associated with
the specified peer IP address.
• all—Displays all xconnect information associated with the specified peer IP
address.
• vcid vcid—Displays xconnect information associated with the specified peer IP
address and the specified VC ID.
detail (Optional) Displays detailed information about the specified xconnect attachment
circuits and PWs.
Release Modification
12.0(31)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SRB This command was updated with the rib keyword.
12.2(33)SRC This command was updated to add SB=Standby and RV=Recovering to the State
of the Segment in output displays.
12.2(33)SXI This command was integrated into Cisco IOS Release 12.2(33)SXI.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English