Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
policy-map
316
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
policy-map
To enter policy-map configuration mode and create or modify a policy map that can be attached to one
or more interfaces to specify a service policy, use the policy-map command in global configuration
mode. To delete a policy map, use the no form of this command.
policy-map [type {control | service}] policy-map-name
no policy-map [type {control | traffic}] policy-map-name
Syntax Description
Command Default The policy map is not configured.
Command Modes Global configuration (config)
Command History
type Specifies the policy-map type.
control (Optional) Creates a control policy map.
service (Optional) Creates a service policy map.
policy-map-name Name of the policy map. The name can be a maximum of 40
alphanumeric characters.
Release Modification
12.0(5)T This command was introduced.
12.4(4)T The type access-control keywords were added to support flexible packet
matching. The type port-filter and type queue-threshold keywords were
added to support control-plane protection.
12.4(6)T The type logging keywords were added to support control-plane packet
logging.
12.2(31)SB The type control and type service keywords were added to support the
Cisco 10000 series router.
12.2(18)ZY The following modifications were made to the policy-map command:
• The type access-control keywords were integrated into Cisco IOS
Release 12.2(18)ZY on the Catalyst 6500 series switch that is equipped
with the Supervisor 32/programmable intelligent services accelerator
(PISA) engine.
• The command was modified to enhance Network-Based Application
Recognition (NBAR) functionality on the Catalyst 6500 series switch
that is equipped with the Supervisor 32/PISA engine.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SRC Support for this command was implemented on Cisco 7600 series routers.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English