Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns inventory
85
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
cns inventory
To enable the CNS inventory agent—that is, to send an inventory of the router’s line cards and modules
to the CNS configuration engine—and enter CNS inventory mode, use the cns inventory command in
global configuration mode. To disable the CNS inventory agent, use the no form of this command.
cns inventory
no cns inventory
Syntax Description This command has no arguments or keywords.
Command Default The CNS inventory agent is disabled.
Command Modes Global configuration
Command History
Usage Guidelines Use this command with the announce config and transport event CNS inventory configuration mode
commands to specify when to notify the CNS configuration engine of changes to the router’s
port-adaptor and interface inventory. A transport must be specified in CNS inventory configuration
mode before any of the CNS inventory commands are executed.
Examples The following example shows how to enable the CNS inventory agent and enter CNS inventory
configuration mode:
Router(config)# cns inventory
Router(cns_inv)#
Related Commands
Release Modification
12.2(8)T This command was introduced.
12.3(1) The config, event, and notify oir keywords were removed.
12.2(25)S This command was integrated into Cisco IOS Release 12.2(25)S.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
cns config initial Starts the CNS configuration agent and initiates an initial configuration.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English