Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns password
86
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
cns password
To configure a Cisco Networking Services (CNS) password, use the cns password command in global
configuration mode. To disable the CNS password, use the no form of this command.
cns password password
no cns password password
Syntax Description
Command Default A CNS password is not configured.
Command Modes Global configuration (config)
Command History
Usage Guidelines You must configure the CNS password the first time a router is deployed, and the CNS password must
be the same as the bootstrap password set on the Configuration Engine (CE). If both the router and the
CE bootstrap password use their default settings, a newly deployed router will be able to connect to the
CE.
Once connected, the CE will change the CNS password from the bootstrap password to a random
password. Network administrators must ensure not to change the CNS password. If the CNS password
is changed, connectivity to the CE will be lost.
Examples The following example shows how to set a CNS password named password1:
Router(config)# cns password password1
Related Commands
password Any character string that specifies the CNS password.
Release Modification
12.4(8)T This command was introduced.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
cns id Sets a unique event ID, config ID, or image ID used by CNS services.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English