Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
shdsl annex
450
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
shdsl annex
To define the single-pair high-bit-rate digital subscriber line (SHDSL) G.991.2 standard, use the shdsl
annex command in config controller DSL group mode.
shdsl annex {standard}
Syntax Description
Command Default SHDSL annex B
Command Modes Config controller DSL group
Command History
standard Defines the standard for the selected type of DSL group.
IMA Group
• A
• A-B
• B
M-PAIR Group
• A
• A-B
• B
• F {coding {16 | 32}}
• F-G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
• G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
1-PAIR and 2-PAIR Group
• A
• A-B
• B
• F {coding 16 | 32}
• F-G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
• G {coding {16 | 32 | 16-TCPAM | 32-TCPAM}
Release Modification
12.4(15)T This command was introduced for the Cisco HWIC-4SHDSL and
HWIC-2SHDSL running on the Cisco 1841 router and on the Cisco 2800 and
3800 series access routers.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English