Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm maintenance-points local
496
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show ethernet cfm maintenance-points local
To display information about maintenance points configured on a device, use the show ethernet cfm
maintenance-points local command in privileged EXEC mode.
show ethernet cfm maintenance-points local [detail] [mep | mip] [domain domain-name |
interface type number | level level-id]
Syntax Description
Command Default When none of the optional keywords and arguments are specified, information about all the maintenance
points on the device is shown.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines The show ethernet cfm maintenance-points local command allows you to filter output. You can
display information about maintenance points as follows:
• Independent of domain or interface
detail (Optional) Indicates that detailed output is specified.
mep (Optional) Indicates that a maintenance endpoint (MEP) is specified.
mip (Optional) Indicates that a maintenance intermediate point (MIP) is
specified.
domain (Optional) Indicates that a maintenance domain is specified.
domain-name (Optional) String of a maximum of 154 characters.
interface (Optional) Indicates that an interface is specified.
type number (Optional) Type and number of the interface.
level (Optional) Indicates that a maintenance level is specified.
level-id (Optional) Integer from 0 to 7 that identifies the maintenance level.
Release Modification
12.2(33)SRA This command was introduced.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.2(33)SRD The detail and evc keywords and the evc-name argument were added.
12.2(33)SXI2 This command was integrated into Cisco IOS Release 12.2(33)SXI2.
• The evc keyword and evc-name argument are not supported in this
release.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA. This
release does not support the evc parameter.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English