Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
cns image retrieve
83
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
cns image retrieve
To contact a Cisco Networking Services (CNS) image distribution server and download a new image if
a new image exists, use the cns image retrieve command in privileged EXEC mode.
cns image retrieve [server server-url [status status-url]]
Syntax Description
Command Default An error occurs when a cns image server has not previously been configured in global configuration
mode.
Usage Guidelines When the cns image retrieve command is issued in privileged EXEC mode without the server keyword
and server-url argument, an error occurs.
When a cns image server has been configured and the cns image retrieve command is issued with no
server keyword and server-url argument, the server path configured in the cns image command is used.
When the cns image command is issued in global configuration mode with the optional server keyword,
no keywords are required and no error occurs when you issue the cns image retrieve command in
privileged EXEC mode.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines You must enable the CNS image agent services using the cns image command before configuring this
command.
server (Optional) Specifies an image distribution server to contact for information
about an updated image to be downloaded.
server-url (Optional) URL used to contact an image distribution server.
status (Optional) Specifies that any status messages generated by this command
will be sent to the URL specified by the status-url argument.
status-url (Optional) URL of a web server to which status messages are written.
Release Modification
12.3(1) This command was introduced.
12.2(31)SB2 This command was integrated into Cisco IOS Release 12.2(31)SB2.
12.2(33)SRB This command was integrated into Cisco IOS Release 12.2(33)SRB.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.
12.2(33)SXI This command was integrated into Cisco IOS Release 12.2(33)SXI.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
To Next Page
Loading...
Need help?
General
