Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ethernet cfm domain
489
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
show ethernet cfm domain
To display information for an Ethernet connectivity fault management (CFM) domain, use the show
ethernet cfm domain command in privileged EXEC mode.
show ethernet cfm domain [domain-name | brief]
Syntax Description
Command Default All information about all the configured domains is displayed when the optional keywords are not used.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines When a domain name is not specified, information for all domains is shown.
If a domain name has more than 43 characters, a warning message is displayed notifying that the
maintenance domain ID (MDID) will be truncated to 43 characters in continuity check messages
(CCMs) if “id <fmt> <MDID>” is not configured.
When the brief keyword is used, the command output shows the following summary data:
• Domain name
• Domain index
• Domain level
• Number of maintenance associations in the domain
• Archive hold time for the error and continuity check databases for the domain
Examples
Following is sample output from a show ethernet cfm domain command using the brief
keyword:
Router# show ethernet cfm domain brief
Domain Name Index Level Services Archive(min)
Domain_L7 19 7 1 100
Domain_L5 20 5 1 100
Domain_port 18 0 1 100
Router1-cfm#
domain-name (Optional) String of a maximum of 154 characters.
brief (Optional) Specifies a display of brief details about configured
maintenance domains.
Release Modification
12.2(33)SXI2 This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English