Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
atm vc-per-vp
16
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
atm vc-per-vp
To set the maximum number of virtual channel identifier (VCIs) to support per virtual path identifier
(VPI), use the atm vc-per-vp interface configuration command. To restore the default value, use the no
form of this command.
atm vc-per-vp number
no atm vc-per-vp
Syntax Description
Defaults 1024
Command Modes Interface configuration
Command History
Usage Guidelines This command controls the memory allocation in the ATM Interface Processor (AIP), ATM port adapter,
ATM network module, or network processor module (NPM) to deal with the VCI table. It defines the
maximum number of VCIs to support per VPI; it does not bound the VCI numbers.
An invalid VCI causes a warning message to be displayed.
Note Changing the value of the atm vc-per-vp command on one interface affects all of the interfaces on that
network module.
number Maximum number of VCIs to support per VPI. Valid values are: 16, 128, 256, 1024, 2048,
4096, 16384, and 65536.
Release Modification
11.0 This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.4(20)MR This command was integrated into Cisco IOS Release 12.4(20)MR.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English