Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ethernet cfm ais link-status global
109
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
ethernet cfm ais link-status global
To globally enable Alarm Indication Signal (AIS) generation and place the command-line interface
(CLI) in CFM SMEP AIS configuration mode (config-ais-link-cfm) to configure AIS commands for a
server maintenance endpoint (SMEP), use the ethernet cfm ais link-status global command in global
configuration mode. To remove the global AIS configuration, use the no form of this command.
ethernet cfm ais link-status global
no ethernet cfm ais link-status global
Syntax Description This command has no arguments or keywords.
Command Default AIS generation is enabled.
Command Modes Global configuration (config)
Command History
Usage Guidelines The ethernet cfm ais link-status global command changes configuration modes to allow you to
configure AIS commands for a SMEP.
Examples The following example shows how to configure AIS commands for a SMEP:
Router(config)# ethernet cfm ais link-status global
Router(config-ais-link-cfm)#
Related Commands
Release Modification
12.2(33)SRD This command was introduced.
15.0(1)XA This command was integrated into Cisco IOS Release 15.0(1)XA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
ethernet cfm ais link-status Enables Alarm Indication Signal (AIS) generation from a server
maintenance endpoint (SMEP).

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English