Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
ptp priority2
350
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
ptp priority2
Sets a secondary preference level for a clock; slave devices use the priority2 value when selecting a
master clock. The priority2 value is considered only when the router is unable to use priority2 and other
clock attributes to select a clock. Use the following commands to set the ptp priority2 value.
ptp priority2 priorityvalue
no ptp priority2 priorityvalue
Syntax Description
Defaults The default value is 128.
Command Modes Interface configuration
Command History
Examples The following example shows how to configure the ptp priority2 value:
Router# config t
Router# interface Vlan10
Router(config-if)# ptp priority2 128
Router(config-if)# exit
Router(config)# exit
Related Commands
priorityvalue Valid values are from 0–255. The default value is 128.
Release Modification
12.4(19)MR2 This command was introduced.
12.2(33)MRA This command was integrated into Cisco IOS Release 12.2(33)MRA.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.
Command Description
ptp priority1 Sets the PTP priority1 value.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English