Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
mep mpid
240
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
mep mpid
To statically define the maintenance endpoints (MEPs) within a maintenance association, use the mep
mpid command in Ethernet connectivity fault management (CFM) service configuration mode. To
remove MEP definitions, use the no form of this command.
mep mpid mpid
no mep mpid
Syntax Description
Command Default No MEPs are statically defined.
Command Modes Ethernet CFM service configuration (config-ecfm-srv)
Command History
Usage Guidelines Use this command to manually configure a list of MEPs in a maintenance association. The device logs
a warning when a discovered MPID is not on the list of configured MPIDs.
Examples The following example shows how to configure a MEP with an ID of 25:
Router(config)# ethernet cfm domain operatorA level 5
Router(config-ecfm)# service vlan-id 5 port
Router(config-ecfm-srv)# mep mpid 25
mpid Integer from 1 to 8191 that identifies the MEP.
Release Modification
12.2(33)SXI2 This command was introduced.
12.2(33)SRE This command was integrated into Cisco IOS Release 12.2(33)SRE.
15.0(1)MR This command was integrated into Cisco IOS Release 15.0(1)MR.

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English