Cisco MWR 2941 User Manual

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show ppp multilink
594
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
rx iw frames: 129369198
rx err mrru: 0
rx err iw mru: 0
rx err iw fbp: 0
rx flushed: 0
last tx seq no: 0x4
tx frames: 4
tx err mrru: 0
Member links: 4 active, 0 inactive (max not set, min not set)
Se0/0:0, since 22:58:46, 7440 weight, 42 frag size, ACT rx link seq: 0x3E399C
Se0/1:0, since 22:58:46, 7440 weight, 42 frag size, ACT x link seq: 0x3E3997
Se0/2:0, since 22:58:45, 7440 weight, 42 frag size, ACT rx link seq: 0x3E3995
Se0/3:0, since 22:58:45, 7440 weight, 42 frag size, ACT rx link seq: 0x3E3996
The following is another example of sample output when a single MLP bundle (named 7206-3) is on a
system and is not offloaded to the network processor:
Router# show ppp multilink
Virtual-Access4
Bundle name: 7206-3
Remote Endpoint Discriminator: [1] 7206-3
Local Endpoint Discriminator: [1] 7206-4
Bundle up for 00:00:07, total bandwidth 64, load 1/255
Receive buffer limit 12192 bytes, frag timeout 1000 ms
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x0 received sequence, 0x0 sent sequence
Member links: 1 active, 0 inactive (max not set, min not set)
BR2/0:1, since 01:59:35, 80 weight, 72 frag size

Cisco MWR 2941 Specifications

General

Brand	Cisco
Model	MWR 2941
Category	Network Router
Language	English