Cisco MWR 2941 - Page 681

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
switchport vlan mapping
663
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
This example shows how to clear the mappings that are between a pair of VLANs:
Router(config-if)# no switchport vlan mapping 100 201
This example shows how to clear all the mappings that are configured on the switch port:
Router(config-if)# no switchport vlan mapping all
Related Commands Command Description
show interfaces vlan
mapping
Display the status of a VLAN mapping on a port.
show vlan mapping Registers a mapping of an 802.1Q VLAN to an ISL VLAN.
switchport vlan
mapping enable
Enables VLAN mapping per switch port.