Dell PowerConnect 5424 User Manual

102 Configuring System Information
Displaying the Device Login History Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing and setting fields displayed
in the Login History page.
The following is an example of the CLI commands:
Configuring the Remote Log Server Settings Page
The Remote Log Server Settings page contains fields for viewing and configuring the available Log
Servers. In addition, new log servers can be defined, and the log severity sent to each sever. To open the
Remote Log Server Settings page, click System
→ Logs → Remote Log Server in the tree view.
Table 6-14. Log File Table CLI Commands
CLI Command Description
show users login-history
Displays password management history
information.
console# show users login-history
Login Time Username Protocol Location
----------- -------- -------- ----------
Jan 1. 2005
23:58:17
Anna HTTP 172.16.1.8
Jan 1. 2005
07:59:23
Errol HTTP 172.16.0.8
Jan 1. 2005
08:23:48
Amy Serial
Jan 1. 2005
08:29:29
Alan SSH 172.16.0.8
Jan 1. 2005
08:42:31
Bob HTTP 172.16.0.1
Jan 1. 2005
08:49:52
Cindy Telnet 172.16.1.7

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation