Dell PowerConnect 5424 User Manual

354 Configuring Device Information
The following is an example of the CLI commands:
Defining LAG Membership
The LAG Membership page contains fields for assigning ports to LAGs. LAGs can include up to
8 ports.When a port is added to a LAG, the port acquires the LAG’s properties. If the port cannot be
configured with the LAG properties, a trap is generated and the port operates with its default settings.
The LAG Membership page contains fields for assigning ports to LAGs. To open the LAG Membership
page, click Switch→ Link Aggregation→ LAG Membership in the tree view.
Figure 7-54. LAG Membership
• LACP — Aggregates the port to a LAG, using LACP.
•
LAG — Adds a port to a LAG, and indicates the specific LAG to which the port belongs.
Console (config)# lacp system-priority 120
Console (config)# interface ethernet g1
Console (config-if)# lacp port-priority 247
Console (config-if)# lacp timeout long
Console (config-if)# end
Console# show lacp ethernet g1 statistics
Port g1 LACP Statistics:
LACP PDUs sent:2
LACP PDUs received:2

Dell PowerConnect 5424 Specifications

General

Brand	Dell
Model	PowerConnect 5424
Category	Switch
Language	English