Dell PowerConnect 5424 User Manual

380 Viewing Statistics
Viewing Etherlike Statistics
The Etherlike Statistics page contains interface statistics. To open the Etherlike Statistics page,
click Statistics/RMON→ Table Vie ws→ Etherlike Statistics in the tree view.
Figure 8-4. Etherlike Statistics
• Interface — Specifies whether statistics are displayed for a port or LAG.
•
Refresh Rate — Amount of time that passes before the interface statistics are refreshed.
•
Frame Check Sequence (FCS) Errors — Number of FCS errors received on the selected interface.
•
Single Collision Frames — Number of single collision frames received on the selected interface.
•
Late Collisions — Number of late collision frames received on the selected interface.
•
Excessive Collisions — Number of excessive collisions received on the selected interface.
•
Oversize Packets — Number of oversize packet errors on the selected interface.

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation