Dell PowerConnect 5424 User Manual

202 Configuring System Information
Defining SNMP Groups
1 Open the A ccess Control Group page.
2 Click Add .
The Add an Access Control Group page opens:
Figure 6-87. Add an Access Control Group
3 Define the fields in the Add an Access Control Group page.
4 Click Apply Changes .
The group is added, and the device is updated.
Displaying the Access Table
1 Open the Access Control Group page.
2 Click Show All .
The Access Table opens:

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation