Dell PowerConnect 5424 User Manual

230 Configuring System Information
Managing Files Using CLI Commands
The following table summarizes the equivalent CLI commands for managing system files.
The following is an example of the CLI commands:
Defining Advanced Settings
The the Advanced Settings page contains a link for configuring general settings. Use Advanced Settings
to set miscellaneous global attributes for the device. The changes to these attributes are applied only
after the device is reset. To open the Advanced Settings page, click System
→ Advanced Settings in the
tree view.
Table 6-50. Copy Files CLI Commands
CLI Command Description
dir Display list of files on a flash file system
console# dir
Directory of flash:
File Name Permis-
sion
Flash
Size
Data
Size
Modified
-------------- ------ ------ ------ --------------------
3.txt rw 524288 523776 22-Feb-2005 18:49:27
setup rw 524288 95 22-Feb-2005 15:58:19
setup2 rw 524288 95 22-Feb-2005 15:58:35
image-1 rw 4325376 4325376 06-Feb-2005 17:55:32
image-2 rw 4325376 4325376 06-Feb-2005 17:55:31
test.txt rw 524288 95 22-Feb-2005 12:16:44
aaafile.prv -- 131072 -- 06-Feb-2005 19:09:02
syslog1.sys r- 262144 -- 22-Feb-2005 18:49:27
syslog2.sys r- 262144 -- 22-Feb-2005 18:49:27
directory.prv -- 262144 -- 06-Feb-2005 17:55:31
startup-config rw 524288 347 22-Feb-2005 11:56:03
Total size of flash: 16646144 bytes
Free size of flash: 4456448 bytes

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation