214 Configuring System Information
Removing a Filter
1
Open the
Notification Filte
r page.
2
Click
Show All
. The
Filter Table
opens.
3
Select a
Filter Table
entry.
4
Check the
Remove
checkbox. The filter entry is deleted, and the device is updated.
Configuring Notification Filters Using CLI Commands
The following table summarizes equivalent CLI commands for defining fields displayed in the
Notification Filters page.
The following is an example of CLI commands:
Defining SNMP Notification Recipients
The Notification Recipients page contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent. SNMP notification filters provide the following services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To open the Notification Recipients page, click System → SNMP → Notification Recipient in the
tree view.
Table 6-45. SNMP Notification Filter CLI Commands
CLI Command Description
snmp-server filter
filter-name oid-tree
{included | excluded}
Creates or updates an SNMP notification filter.
show snmp filters
[
filtername
]
Displays the configuration of SNMP
notification filters.
Console (config)# snmp-server filter user1 iso included
Console(config)# end
Console # show snmp filters
Name OID Tree Type
----------- ------------- --------
user1 iso Included
To Next Page
Loading...
Need help?
General
