Dell PowerConnect 5424 User Manual

238 Configuring System Information
Monitoring iSCSI Sessions
The iSCSI Sessions page contains information about iSCSI communications going through the device.
To open the iSCSI Sessions page, click System
→ iSCSI Optimization→ iSCSI Sessions in the tree view.
Figure 6-111. iSCSI Sessions
For each session, the following information is shown:
• Target Name — The name of the target.
•
Initiator Name — The name of the initiator.
•
ISID — The iSCSI session ID.
When you click Details, the following additional information is shown for the session:
• Session Life Time — The time since the first frame of the session.
•
Aging Time — The time left until the session ages out and is removed.
•
Initiators/Targets IP Address/TCP Port — The IP address and TCP port used by each initiator and
target in the session.

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation