Dell PowerConnect 5424 User Manual

Configuring Device Information 255
Displaying the Locked Port Table
1 Open the Port Security page.
2 Click Show All.
The Port Security Table opens:
Locked Ports can also be defined from the
Locked Ports Table, as well as the Port Security page.
Figure 7-8. Port Security Table
Configuring Locked Port Security with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Locked Port security as
displayed in the Port Security page.
Table 7-4. Port Security CLI Commands
CLI Command Description
shutdown Disables interfaces.
set interface active {ethernet interface
| port-channel port-channel-number}
Reactivates an interface that is shutdown due to
port security reasons.
port security [forward | discard |
discard-shutdown] [trap seconds]
Locks learning of new addresses on an interface.
show ports security {ethernet interface
| port-channel port-channel-number}
Displays port lock status.

Dell PowerConnect 5424 Specifications

General

Brand	Dell
Model	PowerConnect 5424
Category	Switch
Language	English