Viewing Statistics 391
â˘
Multicast Packets Received
â Number of good Multicast packets received on the interface since the
device was last refreshed.
â˘
CRC & Align Errors
â Number of CRC and Align errors that have occurred on the interface since the
device was last refreshed.
â˘
Undersize Packets
â Number of undersized packets (less than 64 octets) received on the interface
since the device was last refreshed.
â˘
Oversize Packets
â Number of oversized packets (over 1518 octets) received on the interface since the
device was last refreshed.
â˘
Fragments
â Number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the device was last refreshed.
â˘
Jabbers
â Number of jabbers (packets longer than 1518 octets) received on the interface since the
device was last refreshed.
â˘
Collisions
â Number of collisions received on the interface since the device was last refreshed.
â˘
Frames of
xx
Bytes
â Number of
xx
-byte frames received on the interface since the device was
last refreshed.
Viewing Interface Statistics
1
Open the
RMON Statistics Group
page.
2
Select an interface type and number in the
Interface
field.
The interface statistics are displayed.
Viewing RMON Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing RMON statistics.
Table 8-5. RMON Statistics CLI Commands
CLI Command Description
show rmon statistics
{ethernet
interface | port-channel port-
channel-number
}
Displays RMON Ethernet statistics.