Epson AcuLaser CX17 Series User Manual

Chapter 6
Copying
Loading Paper for Copying
The instructions for loading print documents are the same whether you are printing, faxing, or
copying. (The fax feature is available only on the Epson AcuLaser CX17NF/CX17WF.)
See Also:
❏ “Usable Print Media” on page 116
❏ “Loading Print Media” on page 118
Preparing a Document
You can use the document glass or the Automatic Document Feeder (ADF) to load an original
document for copying, scanning and sending a fax. (The ADF and fax feature are available only on the
Epson AcuLaser CX17NF/CX17WF.) You can load up to 15 sheets of 64 gsm documents for one job
using the ADF or one sheet at a time using the document glass.
Important:
❏ Avoid loading documents that are smaller than 148.0
× 210.0 mm (5.83 × 8.27 inch) or larger than
215.9
× 355.6 mm (8.5 × 14 inch), different sizes or weights together, booklets, pamphlets,
transparencies, or documents having other unusual characteristics in ADF.
❏ Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased
paper, curled or rolled paper or torn paper cannot be used in ADF.
❏ Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials
such as glue, ink and correcting fluid in ADF.
Note:
To get the best scan quality, especially for color or gray scale images, use the document glass instead of the
ADF.
Epson AcuLaser CX17 Series User’s Guide
Copying 156

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English