Epson AcuLaser CX17 Series User Manual

❏ “Fax Broadcast” on page 266
Automatic Redialing
If the number you have dialed is busy or there is no answer when you send a fax, the printer will
automatically redial the number every minute based on the number set in the redial settings.
To change the time interval between redials and the number of redial attempts, see “Redial Delay” on
page 260 and “Number of Redial” on page 260.
Note:
The printer will not automatically redial a number that was busy when the number was manually
entered.
Sending a Delayed Fax
The Delayed Start mode can be used to save scanned documents for transmission at a specified time to
take advantage of lower long distance rates.
1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See Also:
❏ “Loading an Original Document on the ADF” on page 218
❏ “Loading an Original Document on the Document Glass” on page 219
2. Press the
(Fax) button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏ “Resolution” on page 220
❏ “Lighten/Darken” on page 221
4. Select Delayed Start, and then press the
button.
5. Select On, and then press the
button.
Epson AcuLaser CX17 Series User’s Guide
Faxing (Epson AcuLaser CX17NF/CX17WF Only) 225

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English