Epson AcuLaser CX17 Series User Manual

Copy Quality Problems
Problem Action
(Epson AcuLaser CX17NF/CX17WF
only)
There are lines or streaks in copies
made from the ADF.
There is debris on the ADF glass. When scanning, the paper from the ADF passes
over the debris creating lines or streaks.
Clean the ADF glass with a lint free cloth.
See Also:
“Cleaning the Scanner” on page 355
There are spots in copies taken from the
document glass.
There is debris on the document glass. When scanning, the debris creates a spot on
the image.
Clean the document glass with a lint free cloth.
See Also:
“Cleaning the Scanner” on page 355
The reverse side of the original is
showing on the copy.
On the Copy menu, enable Auto Exposure.
For information on turning Auto Exposure on and off, see “Auto Exposure” on
page 169.
Light colors are washed out or white on
the copy.
On the Copy menu, disable Auto Exposure.
For information on turning Auto Exposure on and off, see “Auto Exposure” on
page 169.
Image is too light or dark. Use the Lighten/Darken option on the Copy menu.
For information on making the image lighter or darker, see “Lighten/Darken” on
page 167.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Epson AcuLaser CX17 Series User’s Guide
Troubleshooting 330

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English