Epson AcuLaser CX17 Series User Manual

Connecting Printer to Computer or Network
Connect the printer via Ethernet or USB. (A network connection is available only on the Epson
AcuLaser CX17NF/CX17WF.) Hardware and cabling requirements vary for the different connection
methods. Ethernet cable and hardware are not included with your printer and must be purchased
separately.
The available features for each connection type are shown in the following table.
Epson AcuLaser CX17NF/CX17WF
Connection Type Available Features
USB When connected via USB you can:
❏ Instruct print jobs from a computer.
❏ Scan and print an image into an application.
❏ Scan and print an image to a folder on the computer.
❏ Use the Address Book Editor to manage Address Book entries.
Ethernet When connected via Ethernet you can:
❏ Instruct print jobs from a computer on the network.
❏ Scan and print an image to a computer on the network.
❏ Scan and print an image to an FTP server.
❏ Scan to email.
❏ Use EpsonNet Config to manage Address Book entries.
Epson AcuLaser CX17
Connection Type Available Features
USB You can:
❏ Instruct print jobs from a computer.
❏ Scan and print an image into an application.
❏ Scan and print an image to a folder on the computer.
USB Connection
If your printer is attached to a network instead of your computer, skip this section and go to “Network
Connection (Epson AcuLaser CX17NF/CX17WF Only)” on page 45.
The following operating systems support USB connection:
Epson AcuLaser CX17 Series User’s Guide
Printer Connection and Software Installation 43

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English