Making Copies From the Document Glass
Note:
❏ A computer connection is not required for copying.
❏ For the Epson AcuLaser CX17NF/CX17WF, ensure that no document is in the ADF. If any
document is detected in the ADF, it takes priority over the document on the document glass.
❏ Contaminants on the document glass may cause black spots on the copy printout. For best results,
clean the document glass before use. For more information, see “Cleaning the Scanner” on
page 355.
To make a copy from the document glass:
1. Open the document cover.
2. Place the document face down on the document glass and align it with the registration guide on the
top left corner of the document glass.
Epson AcuLaser CX17 Series User’s Guide
Copying 157