Epson AcuLaser CX17 Series User Manual

Network Connection Setup (Epson AcuLaser CX17NF/CX17WF Only)
The following procedure uses Windows XP as an example.
1. Insert the Software Disc into your computer’s CD/DVD drive.
The Install Navi launches.
Note:
If the Software Disc does not automatically launch, click Start (start for Windows XP) — All
Programs (for Windows Vista and Windows 7) — Accessories (for Windows Vista and Windows
7) — Run, and then enter D:\EPSetup.exe (where D is the drive letter of your computer’s CD/DVD
drive), and then click OK.
2. Click Easy Install.
The SOFTWARE LICENSE AGREEMENT appears.
3. If you agree to the terms of the SOFTWARE LICENSE AGREEMENT, select Agree and then click
Next.
The Easy Install Navi launches.
4. Click Installing Drivers and Software.
5. Select Network Installation, and then click Next.
6. Select the printer you want to install from the printer list, and then click Next. If the target printer
is not displayed on the list, click Refresh to refresh the list or click Add Printer to add a printer to
the list manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select I am setting up this printer on a
server check box.
Note:
When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a
valid IP address.
7. Specify the printer settings, and then click Next.
a Enter the printer name.
Epson AcuLaser CX17 Series User’s Guide
Printer Connection and Software Installation 56

Epson AcuLaser CX17 Series Specifications

General

Brand	Epson
Model	AcuLaser CX17 Series
Category	Printer
Language	English