LCD Panel Messages
The LCD panel provides you with information and troubleshooting help. When an error or warning
condition occurs, the LCD panel displays a message informing you of the problem.
See Also:
“Understanding Printer Messages” on page 340
Status Monitor Alerts
The Status Monitor is a tool that is included on the Software Disc. It automatically checks the printer
status when you send a print job. If the printer is unable to print your job, the Status Monitor
automatically displays an alert on your computer screen to let you know that the printer needs
attention.
Non-Genuine Mode
When toner within a toner cartridge is end of its service life, the XXXX Cartridge is Close to
Life or Replace XXXX Cartridge (XXXX: Yellow, Magenta, Cyan, or Black) message appears.
When you want to use the printer in the Non-Genuine Mode, enable the Non-Genuine Mode and
replace the toner cartridge.
Important:
If you use the printer in the Non-Genuine Mode, the performance of the printer may not be at its
optimum. And any problems that may arise from the use of the Non-Genuine Mode are not covered by
our quality guarantee. The continuous use of the Non-Genuine Mode can also cause the printer to break
down, and any repair charges for such break down will be incurred by users.
Note:
To disable the Non-Genuine Mode, select Off for Non-Genuine Mode on the operator panel or deselect
the check box next to On on the Non-Genuine Mode page on the Printer Maintenance tab in the
Printer Setting Utility.
Epson AcuLaser CX17 Series User’s Guide
Troubleshooting 353
To Next Page
Loading...
Need help?
General