❏ Film
❏ Blueprint
❏ Actual printing stock
❏ Carrier sheet
c
Important:
If tracing paper is loaded, the printer cannot
automatically detect the width. On the control
panel, set Original Size or Scan Size.
U “Copy (SC-P8500DM Series/SC-T7700DM
Series/SC-T5700DM Series Only)” on page 163
U “Scan (SC-P8500DM Series/SC-T7700DM
Series/SC-T5700DM Series Only)” on page 164
Documents That Cannot Be
Loaded
Do not load originals such as the following. Failure to
observe this precaution could cause paper jams or
damage the printer.
❏ Originals that are bound
❏ Originals that are bent
❏ Originals with carbon backing
❏ Originals that are attached with staples, paper
clips, or glue
❏ Originals that have many holes, such as loose leaf
paper
❏ Originals that are shaped irregularly or not cut at
right angles
❏ Originals with photos, stickers, or labels attached
❏ Originals that are transparent
❏ Originals that are glossy
❏ Originals that have become deteriorated
❏ Originals that are torn
When loading documents that
are thin, that are easily torn, or
that you do not want to damage
Use the optional carrier sheet for thin documents and
documents that you do not want to damage.
U “Options and Consumable Products” on page 214
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Copy (SC-P8500DM Series/SC-T7700DM Series/SC-T5700DM Series Only)
130
To Next Page
Loading...
Need help?
General