K
Return the roll2 unit.
L
Lower the spindle lock lever.
M
Pull out the paper basket.
You can stack one sheet at a time in the paper
basket. When printing multiple sheets, remove
the ejected paper so that print outs do not
accumulate in the basket.
N
Make the paper settings.
U “Setting Loaded Paper” on page 56
Removing Roll 2 (Except for the
SC-P6500E Series/SC-T3700E
Series)
This section describes how to remove the roll paper
from the printer after printing. If the roll paper is not
cut, select Menu - Paper Setting - Roll 2 - Feed/Cut
Paper and adjust the cutting position to cut the roll
paper.
c
Important:
Do not pull out the roll2 unit while the paper is
loaded.
Otherwise, the paper may wrinkle when you
return the roll2 unit after it has been pulled out.
When returning the unit, slowly return the roll2
unit while taking-up the paper.
A
If the paper basket is pulled out, remove the
printing paper and store the paper basket.
B
Select Menu - Paper Setting - Roll 2 - Remove.
Note:
You can also eject the roll paper by pressing the
Roll2 removal button.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Basic Operations
48
To Next Page
Loading...
Need help?
General