Loading Roll 2 (Except for the
SC-P6500E Series/SC-T3700E
Series)
A
Turn on t he printer.
B
Set the paper support to the position shown in
the illustration.
Note:
Close the flap if it is open.
C
Raise the spindle lock lever.
D
Pull out the roll2 unit.
E
Remove the spindle.
F
Remove the transparent media edge guide from
the spindle.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Basic Operations
46
To Next Page
Loading...
Need help?
General