Maintenance
115
5
5.4
Loading Paper
The following describes the types of paper that can be used on the machine, and how to
load paper in trays.
5.4.1 Paper Types
Use of inappropriate paper may result in paper jams, cause reduced print quality,
To obtain the most out of this printer, it is recommended to use the paper intro-
duced herein.
If you want to use paper not recommended by Fuji Xerox, contact our Customer
Support Center.
●
When changing the paper type in a tray, change the tray setting to the corresponding one on the
control panel. For more information, refer to "Paper type settings procedure" (P.123).
●
The printed image may fade due to moisture such as water, rain or vapor. For more information,
contact our Customer Support Center.
For information about paper sizes that can be loaded in trays, refer to "A Main Specifications".
Paper Types
■Plain Paper (Printable Paper)
When using supplier paper (known as printable paper) for printing, make sure
that it complies with the following specifications. However, it is recommended
that you use the standard paper types introduced on the next page, to achieve
clear print results.
●
Printing with paper that is a different type or size from the paper selected by the print driver, or
printing from an unsupported paper tray may result in paper jams. To ensure correct printing,
select the correct paper size, paper type, and paper tray.
●
When printing with a non-standard paper size from Tray 5 (bypass), you must manually enter the
paper size. In addition, if you use a non-standard paper size often, you can preset the size on the
control panel. Then the preset size appears under [Standard Sizes] in the [Tray 5 (Bypass)] dialog
box. For information about setup, refer to "4.6.2 Setting Non-standard Paper Sizes" (P.60).
●
When using 12 x 18 inch paper from Tray 5 (bypass) to print, slide the paper guide before loading
the paper.
Paper tray Weight Loadable quantity
Trays 1 to 4
64 to 98 g/m
2
560 sheets (Xerox P paper)
Tray 3 (high capacity) 64 to 98 g/m2 980 sheets (Xerox P paper)
Tray 4 (high capacity) 64 to 98 g/m2 1,280 sheets (Xerox P paper)
Tray 5 (bypass) 55 to 220 g/m2 Up to 10mm 100 sheets (Xerox P paper)
To Next Page
Loading...
Need help?
General
