Fuji Xerox DocuPrint C4350 User Manual

5.4 Loading Paper
127
Maintenance
5
5.4.4 Loading Paper into Tray 5 (Bypass)
When printing on postcards, envelops, or non-standard size paper that cannot
be loaded in Trays 1 to 4, use Tray 5 (bypass tray). The following describes how
to load paper into Tray 5 (bypass tray).
Detailed print instructions are designated using the [Paper/Output] tab in the
print driver. At that time, also specify the type of paper to load. The paper types
that can be specified are as listed below.
●
Plain paper (64 to 98 g/m
2
)
●
Bond paper (64 to 98 g/m
2
)
●
Recycled paper (64 to 98 g/m
2
)
●
Heavyweight paper 1, Heavyweight paper 1/Side 2 (99 to 169 g/m
2
)
●
Heavyweight paper 2, Heavyweight paper 2/Side 2 (170 to 220 g/m
2
)
●
Transparency
●
Lightweight paper (55 to 63 g/m
2
)
●
Lavels (99 to 169 g/m
2
)
●
Custom paper 1 to 5
●
Coated paper 1, Coated paper 1/Side 2 (99 to 169 g/m
2
)
●
Coated paper 2, Coated paper 2/Side 2 (170 to 220 g/m
2
)
Positions on sides 1 and 2 may deviate when printing on name-card paper.
For information about printing on special paper, refer to "4.3 Printing on Special Paper" (P.49), "4.4
Printing on Postcards/Envelopes" (P.52), and/or "4.6 Printing on Non-Standard Size/Long-size
Paper" (P.58).
P
roce
d
ure
1
Open the Tray 5 (bypass).
If necessary, extend the extension flap. The extension
flap can be extended in two stages.
1
2

Fuji Xerox DocuPrint C4350 Specifications

General

Brand	Fuji Xerox
Model	DocuPrint C4350
Category	Printer
Language	English