7.2 Description of Common Menu
261
Setting Common Menu
7
Output Color
Set whether to print in color or black and white.
[Color (Auto)] (default)
Automatically detects if the document is color or black and white by each page. When any color is
used, the page is printed in color and, when the page is monochrome, it is printed in black and white.
[Black]
Prints in black and white.
7.2.2 The System Administrator Menu
The menu for configuring the settings for Network/Port, System Settings (such
as alert tone, power saver mode), Printer Settings, Allocate Memory, Image
Quality, initializing the printer's settings or the hard disk, removal of form data.
Network/Port
The menu to configure necessary settings for the type of interface connected to
the computer and communication in the network.
Parallel
Set when using a parallel interface.
â– Port Startup
Set the status to [Enable] or [Disable] in parallel interface when the power is switched on. The
default is [Enable], which allows the use of the parallel interface.
Set the status of ports that are not used to [Disabled] or change the memory allocation capacity at [Allocate
Memory], in case of insufficient memory.
â– Print Mode (LOOK 1) (P.301)
Set the process method (targeted print language) of the print data.
The optional values are as follows:
[Auto] (default)
The proper process is automatically selected according to the language of the data received from the
computer.
[PS] [ESC/P] [HP-GL/2] [PCL] [TIFF]
Data received from the computer is processed.
To Next Page
Loading...
Need help?
General
