5.6 Printing Report/List
156
Maintenance
5
Error History Report
The information relating to errors occurred to the printer is printed out. Up to 50
latest errors are printed on the error history report including the date, time, error
code, and error type.
Job History Report
Print job execution results are printed to notify if the print data sent from the com-
puter are printed correctly. Up to 50 latest print jobs are printed on the job history
report. You can use the control panel to set whether to automatically print the job
history report every time the number of print jobs exceeds 50.
â– Print Result
The items listed below of up to 50 latest print jobs are printed on the job history
report:
Date, job ended time, input source (sender), output destination, job information,
page information, number of pages, number of sheets, and job status
â– Abnormal End of Job
The <Job Processing Status> may indicate the following abnormal end mes-
sages.
UPnP Discovery (port status and port number).
Mail Notice Service Port status.
E-mail settings - For POP3 receiving protocol
Main receiving port status, receiving protocol, POP3 server (server
name/IP address, port number, login name, and receive interval),
POP receiving password encryption, whether to print header and
contents (mail), and whether to receive only from specified
domains.
- For SMTP receiving protocol
Main receiving port status, receiving protocol, SMTP server (server
name/IP address and port number), authentication method at send,
SMTP AUTH login name (only when authentication method at send
is SMTP AUTH), and mail address of the printer.
Error message Cause and Action
016-799 Cause: Combination of printer parameters is incorrect such
that <Paper Tray Selection> is set to <Auto> while
non-standard size is instructed.
Action: Check the print data. If above case is applied, select Tray 5
(bypass tray).
To Next Page
Loading...
Need help?
General
