A Main Specifications
307
Appendix
A.2 Output Sizes Supported by Finisher
The finisher can handle paper of the types listed in the table.
●
If Direction is Vertical, paper can be punched or stapled on the long edge.
●
If Direction is Horizontal, paper can be punched or stapled on the short edge.
●
This table does not indicate whether punching or stapling is possible depending on the document
direction.
○ : Supported X: Not supported
Output Size
Direction
Output Tray
Stapling
Punching
Main Unit Finisher
Center
Tray
Output
Tray
Finisher
Tray
Booklet
tray
A4
Horizontal
○○○○○×
Vertical
○○○×○○
A3
Horizontal
○○○○○○
B5
Horizontal
○○××××
Vertical
○○○×○○
B4
Horizontal
○○○○○○
8 x 10"
Horizontal
○○○×○×
Vertical
○○○×○×
8.5 x 11"
(Letter)
Horizontal
○○○○○×
Vertical
○○○×○○
8.5 x 13"
Horizontal
○○○○○×
8.5 x 14"
(Legal)
Horizontal
○○○○○×
11 x 17"
Horizontal
○○○○○○
16-kai
Horizontal
○○××××
Vertical
○○○×○○
8-kai
Horizontal
○○○○○○
User-
defined
-
○○○×○×
To Next Page
Loading...
Need help?
General
