Basic Operations
43
3
3.5
Loading Configuration of Options
and Paper Settings for Trays
If you are using this printer as a network printer, you can load the printer configuration and the paper type
and size specified for the tray on the control panel into the print driver.
If you are using this printer as a local printer, this feature is not available. Manually set the relevant setting items of
the print driver. The settings made manually must match the information in the printer.
ure
1
Click [Start] and then [Printers and Faxes].
Depending on the operating environment, click [Start], and then select [Settings] > [Printers].
2
Right-click the icon of the printer in use. When a menu is displayed,
click [Properties].
3
Click the [Options] tab and then [Get Information from Printer].
The printer information is loaded into the print driver.
The screen shown below is that of the printer with all options installed.
4
Click [OK].
The contents of the [Options] tab are updated according to the information obtained from the printer.
●
The automatically detected size and orientation are displayed in the [Paper Tray Information] box.
●
The paper type set on the control panel is displayed in the [Paper Tray Information] box. If no
paper type is set on the control panel, plain paper is assumed to be set as the paper type.
3
4
To Next Page
Loading...
Need help?
General
