4.6 Printing on Non-Standard Size/Long-size Paper
60
Printing
4
4.6.2 Setting Non-standard Paper Sizes
Register non-standard sizes in the print driver.
When loading non-standard size paper in trays 1-4 for printing, you also need to
make settings on the control panel.
Non-standard size paper cannot be loaded in the optional tray 3 (large capacity) and optional tray 4
(large capacity).
Making settings on the control panel
The following is an example in which paper with a 200-mm short edge and a
300-mm long edge is loaded in tray 1.
●
When loading non-standard size paper in tray 5 (bypass tray), you need not make settings on the
control panel.
●
When changing the type of the paper in trays 1-4, refer to "5.4.2 Loading Paper into Trays 1 to 4"
(P.121).
To Next Page
Loading...
Need help?
General
