A Main Specifications
305
Appendix
Professional Finisher
Machine space
required
Standard model:
632W x 717D mm
(Not including Tray 5 (Bypass)
Weight
(Excluding toner car-
tridge, paper, and
options)
Standard model: 85kg or less
Standard + 1 tray module: 110kg
Standard + 3 tray module: 115kg
Standard + high capacity tray module: 125kg
Standard + Finisher: 175kg
Item Specification
Tray Type Output tray x 1 Sort/Stack
Finisher tray x 1 Sort (Offset possible)
Stack (Offset possible)
Booklet tray x 1
Output Size/
Supported Paper
Output tray
Maximum: 12 x 18", Minimum: Postcard, 55 to 220 g/m
2
Finisher Tray
Maximum: 12 x 18", Minimum: B5, 64 to 220 g/m
2
Booklet tray
Maximum: 11 x 17", Minimum: 8.5 x 11", 64 to 90 g/m
2
Tray Capacity
Fuji Xerox P Paper
Output tray A4:
500 sheets
Finisher tray A4:
1,500 sheets,
B4 or larger paper: 1,500 sheets,
Mixed stack*: 300 sheets
*: If large paper is stacked on small paper
Booklet tray
20 copies
Stapling
Fuji Xerox P Paper
Maximum stapling speed:
50 sheets/minute (90 g/m2 or less)
Stapling position:
One (front, inside, or askew), Two (parallel)
For stapling-supported output sizes, refer to "A.2 Output Sizes
Supported by Finisher" (P.307).
Item Specification
717
632
Unit: mm
To Next Page
Loading...
Need help?
General
