7.2Description of Common Menu
274
Setting Common Menu
7
SNTP Settings
Set the system clock of this machine by Simple Network Time Protocol (SNTP).
â– NTP Synchronize
Set whether to set the clock of this printer in synchronization with the NTP server. The default is
[Off].
â– Connect Interval
Set the NTP server connection interval in the range of 1 to 500 hour, incremented by one hour. The
default is [168 Hour(s)].
â– NTP IP Address (Note 1)(P.289)
Set the IP address of the NTP server to connect. The IP address input format is xxx.xxx.xxx.xxx.
xxx is a numeric value from 0 to 255. The default is [000.000.000.000].
A wrong IP address may cause trouble to the entire network.
HTTP-SSL/TLS
Set this to encrypt HTTP communication by using SSL or TLS. This item is available when a server
certificate is registered in this printer.
â– Enabled/Disabled
Set whether to enable or disable encrypted communication by SSL or TLS. The default is [Off]. Set
[On] to encrypt HTTP communication data.
â– Port No
Set a port number in the range from 1 to 65535. The default is [443].
To Next Page
Loading...
Need help?
General
