3.1 Main Components and Their Functions
32
Basic Operations
3
Professional Finisher C
●
The finisher C (hereafter called the finisher) is an option.
●
When installing the finisher, one of 1 tray, 3 trayt, and high capacity tray modules and an internal
hard disk drive (optional) are required.
No. Name Description
26 Front cover (G) Open this cover when clearing a paper jam, adding staples, removing a
stable jam, or removing punched hole chips.
27 Output tray Printed sheets of paper are ejected here.
28 Exit cover Open this cover to clear a paper jam.
29 Finisher tray Stapled documents are ejected.
30 Staple cartridge This cartridge contains staples. Remove it when clearing a staple jam.
31 Booklet tray Booklets are ejected here when "Fold" is specified with the booklet
function.
32 Booklet unit This unit is used to fold sheets of paper into two or staple the sheets
folded into two.
33 Center output tray
(Top cover of finisher
connection section)(F)
Paper that cannot be ejected to the output tray or finisher tray is ejected
here.
Open this cover when a paper jam occurs.
Try to remove the paper ejected to the center tray as frequently as possible.
To Next Page
Loading...
Need help?
General
