[Maintenance]
121
[Altitude Settings]
Set the altitude of the place the device is located.
Setting the correct altitude helps the device to secure the print quality and display the
accurate remaining amount of toners.
[Adjust Fusing Temperature]
Adjusts the fusing temperature per paper type.
The separation of an image or curl of paper, which occurs depending on the paper type or
environment, may improve owing to the fusing temperature adjustment.
[Process Control Setup]
Adjusts the toner density automatically.
Perform this feature such as when you find any toner density disorder or you need to print
more accurate.
[Ink Setoff Prevention]
Set whether or not to activate the function to prevent the adhesion of sheets of paper.
[Coated Paper Print Mode]
Set whether to focus more on the speed or the image quality on the printing.
[Clean Developer Unit and Transfer Module]
After the device has been remained with powered on but not perform printing for a certain
period, the background of the print result may have some unwanted colored parts. To
improve this fault, clean the Developer Unit and the Transfer Module.
[Toner Density Settings]
Adjusts the amount of toner to consume when printing. Reducing the density saves toners
and increasing makes the printed image clearer.
[Refresh Toner]
Re-adjusts the toner density and the developer voltage. Refreshing toners optimizes the
print quality.
Do not perform Refresh Toner too many times as the toner would decrease at a fast pace.
[Clean Transfer Belt]
If dust stick to the Transfer Belt, the black or colored vertical stripes or lines may appear on
the printed image. To improve this fault, clean the Transfer Belt.
[Primary Transfer Current Adjustment]
Adjusts the transfer voltage of the black toner and color toner when a poor transfer due to
paper type or environment causes missing a part of image.
To Next Page
Loading...
Need help?
General
