Fuji Xerox DocuPrint CP475 AP User Manual

[Connectivity & Network Setup]
155
[HTTPS Proxy Server Password]
Enter a password of the HTTPS proxy server. Up to 31 characters are allowed.
[HTTP Proxy Server Name]
Enter the server name or IP address of the HTTP proxy server. Up to 255 characters are
allowed. You can specify the addresses by IPv4 address, IPv6 address, and FQDN.
[HTTP Proxy Server Port Number]
Set the HTTP proxy server port number from 1 to 65535.
Important

Do not use the numbers assigned to the other ports.
[HTTP Proxy Server Authentication]
Select [Enabled] when authentication is required to connect to the HTTP proxy server.
[HTTP Proxy Server Login Name]
Enter a login name of the HTTP proxy server.
[HTTP Proxy Server Password]
Enter a password of the HTTP proxy server.
[Outgoing / Incoming Email Settings]
[POP3 Server Settings]
 [Server Name / IP Address]
Enter a server name or IP address.
 [Port Number]
Enter a port number.
 [Polling Interval]
Set the interval for checking the email on the POP3 server.
 [Login Name]
Enter the name to log in to the POP3 server.
 [Password]
Enter a password for the POP3 server.
 [POP Password Encryption]
Select whether or not to encrypt the password.
[SMTP Server Settings]
You can check the connection between the device and the SMTP server by sending a test
mail to the email address specified in [Connection Test]. Selecting [Connection Test] >
[Print SMTP Comm Report] outputs the report that shows the contents of protocol of the
SMTP communication transmitted and received by the device.

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English