Fuji Xerox DocuPrint CP475 AP User Manual

[Connectivity & Network Setup]
149
[Internet Services (HTTP)]
 [Port Status]
Select [Enabled] to use CentreWare Internet Services.
Reference

For more information about CentreWare Internet Services, refer to "Using CentreWare Internet Services"
(P.64).
 [Port Number]
Enter a port number for the Internet Services.
Important

Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, and Web Services on
Devices (WSD)).
Note

You cannot select [Port Number], if HTTP port is disabled. To configure [Port Number], enable port status and
reboot the device, and then configure [Port Number].
[SOAP]
 [Port Status]
Select [Enabled] to use the SOAP port.
 [Port Number]
Enter a port number for SOAP.
Important

Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, and Web Services on
Devices (WSD)).
[ThinPrint]
 [Port Status]
You can use the device for print in the ThinPrint environment. The device decompresses and
prints the compressed print data sent from the server (Windows Server).
 [Port Number]
Enter a port number for ThinPrint.
Important

Do not use any numbers assigned to the other ports.
Note

ThinPrint is available when the communication protocol uses IPv4.

The maximum of three connections are possible at a time.
[Wireless LAN Settings]
You can make the settings for the wireless LAN communication.
Reference

For information on the setting procedures, refer to the manuals accompanying the Wireless Network Kit
(optional).

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English