[System Settings]
135
[List of Embedded Plug-ins]
Display the embedded plug-in name and status on the list.
[Other Settings]
[Auto Job Promotion]
You can select whether or not to allow another job to automatically bypass the current job
when the device is unable to start an operation for any reason, (for example, running out of
paper in a tray when starting printing).
Stored documents such as Secure Print and Sample Set documents cannot be used with the Auto Job
Promotion feature.
[Default Print Paper Size]
You can set the paper size.
[Odd Page 2 Sided]
Set whether or not to add the side 2 of the last page for a document of an odd number of
pages.
[Paper Size Settings]
Set the size of paper to be automatically detected when the device is set to detect paper
sizes.
[Millimeters / Inches]
Allows you to select unit of measurement displayed on the screen.
[Data Encryption]
Allows you to select whether or not to encrypt data recorded on the device.
In order to prevent information of the device from leakage, encrypt the data stored on the
device such as authentication information and stored documents. The encryption is also
performed for when writing data of printed images to the device.
You cannot select whether or not to encrypt by feature.
Starting the Data Encryption and Changing Settings
When you select/deselect data encryption or change the encryption key, you must restart
the device. When the device reboots, the device initializes the storage. The previous data is
not secured.
The disk area stores the following data.
Spooled print data
Print data including Secure Print and Sample Set
Forms for the Form Overlay feature
Digital certificate
Be sure to save all necessary settings and files before using data encryption or changing any settings.
An error occurs if the currently connected storage doesn’t match the encryption settings. For information on
error messages and measures to take, refer to "Error Code" (P.265).
To Next Page
Loading...
Need help?
General
