Fuji Xerox DocuPrint CP475 AP User Manual

Emulation
289
PCL Emulation
Setting Menu Item Related to the PCL Mode
 [Port Settings]
Sets the port used in the emulation mode under [Device] > [Connectivity & Network Setup]
> [Port Settings].

Port Status (LPD/IPP/USB/Port 9100)
Enables the ports to be used in the PCL emulation mode.

[USB - Print Mode]
Sets the print mode of the USB port so that it can be used by PCL emulation. Select [PCL]
as the print mode.
Note

[USB - Print Mode] sets the method of processing data received from host interfaces. If this is set to [PCL]
here, the device will not switch languages automatically as described in "Switching between Printer
Languages" (P.281).

The print mode can also be specified for each protocol (LPD, IPP, Port 9100, or WSD) from CentreWare
Internet Services.
PCL Settings List
Parameter Item No. Value
Paper tray 201 [0] (Default): Auto
[1]: Tray 1
[2]: Tray 2
[3]: Tray 3
[4]: Tray 4
[5]: Tray 5
Note

When [Auto] is selected and paper of the same size in the same orientation in multiple
trays is loaded, paper will be fed in the order of Tray 1  Tray 2  Tray 3  Tray 4. If
paper of the same size is loaded in multiple trays but in different orientations, feeding
of the paper loaded in the landscape orientation is prioritized.
Auto size 202 Set the paper size of when [Paper Tray] is set to [Auto]. Only cut sheet can be set.
[4] (Default): A4
[5]: A5
[15]: B5
[21]: 8.5 x 14"
[22]: 8.5 x 13"
[23] (Default): 8.5 x 11"
[25]: Custom Size
Important

When Trays 1 to 4 is selected for [Paper tray], [Paper Size] cannot be set. The paper
size loaded in the specified tray is displayed.
Note

Depending on the combination of [Original Size] and [Paper Size], [?] may be displayed
for the magnification. In this case, the document is printed at a scale of 100%.

Fuji Xerox DocuPrint CP475 AP Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP475 AP
Category	Printer
Language	English